MIMAKI JFX500-2131 - Table of Contents; Applicable Environment

- 2 -
Applicable environment
Table of Contents
Notice ......................................................................................................................... 1
Applicable environment ............................................................................................ 2
Setting the printer ..................................................................................................... 3
Effects and printing with clear ink ........................................................................... 4
Clear ink’s effects ................................................................................................................... 4
Ways clear ink can be printed ............................................................................................... 5
Printing methods ....................................................................................................... 6
Data creation and printing procedures ................................................................................. 6
1. Decide the way the clear ink is to be printed ....................................................................... 7
A.Printing the clear ink over the whole of the color image .................................................... 8
B.Printing the clear ink onto the valid pixels of the color image ........................................... 9
C.Printing a special clear ink image ................................................................................... 10
2. Select the clear ink’s effect: set the UV mode ................................................................... 13
a.Setting Glossy Print ......................................................................................................... 14
b.Setting Matte Print ........................................................................................................... 19
c.Setting Emboss Print ....................................................................................................... 20
3. Set the recommended values for the printing conditions ................................................ 21
4. Execute printing ................................................................................................................... 22
Setting glossy finish for Emboss Print ................................................................. 23
Printer JFX500-2131 F.W. Ver. 2.8 or later
Ink
Color LH-100/ LUS-150/ LUS-120
Clear LH-100 clear ink
RIP
RasterLink6 Ver.5.7 or later
RasterLink6Plus Ver.1.0 or later