- 21 -
3. Set the recommended values for the printing conditions
To obtain better effects from the clear ink, use the settings below that are appropriate for the image quality and
output speed that you want.
In the case of LH-100 ink in color ink:
Glossy print
Matte printing, emboss printing
In the case of LUS-150/ LUS-120 ink in color ink:
Glossy print
Matte printing, emboss printing
1.
In the job list, select the applicable job.
• Click the “Quality” icon.
2.
Select both the color job and the clear
ink job that are displayed in the job list.
• You can select multiple items by holding down the
CTRL key while clicking on them.
• By selecting both jobs, you can set the same con-
ditions for both of them.
Resolution Pass Print direction High speed
600×900 VD 12 Bi ON
Print mode Resolution Pass Print direction High speed
Production 600×900 VD 12 Bi ON
Standard 600×900 VD 24 Bi ON
Quality 1200x1200 ND 16 Uni OFF
High Quality 1200x1200 ND 32 Bi OFF
Resolution Pass Print direction High speed
600×900 VD 12 Bi ON
Print mode Resolution Pass Print direction High speed
High Speed 600×600 VD 8 Bi ON
Production 600×900 VD 12 Bi ON
Standard 600×900 VD 24 Bi ON
Quality 1200x1200 ND 16 Uni OFF
High Quality 1200x1200 ND 32 Bi OFF
To Next Page
Loading...
