MIMAKI JFX500-2131 - Names of Parts and Functions

- 18 -
Composite
1.
Choose one job of color and two jobs of clear ink from the job list.
• Click the “Composition” icon.
2.
Carry out the following
check.
(1) From the top order of the list
Clear(Glossy) -> Clear(Matte) -
>Color
Check the order
• If the order is not as above,
please replace the composi-
tion List by Drag & Drop.
(2) After the above check, click the
[Composite] button.
3.
The images will be compos-
ited.
• In glossy print, depending on the type of color ink using, print the clear image as follows.
(1)
(2)
Color ink
Synthesis conditions of synthetic screen
Speed priority(*)
(*) If the speed priority, setting of the UV mode set to the color image is ignored, and print setting of the UV
mode set clear image.
Quality priority(**)
(**) Each color image and clear image will be printed as of setting of UV mode set for each.
LH-100(***)
(***)When color ink is LH-100 and the base clear is printed, print in the same way as for LUS-150/ LUS-120.
Print at the same time in the order
of color image -> clear image.
After printing the color image, print
the clear image.
LUS-150/
LUS-120
After printing at the same time in the
order of color image -> bottom
clear, print the clear image.
After printing a color image, print
the bottom clear, and finally print
the clear image.