1. Connecting to a Local Network
5
l
Method 1 for checking the LAN connection of the control PC
1
Check the LAN connector indicators near the bottom on the back of the control PC.
• The LAN connector indicators are illuminated when the system is connected.
• If the indicators are not illuminated, insert the LAN cable until it clicks into place.
LED Status Summary
SPEED Green Linked via 10GBASE-T
Yellow Linked over a connection other than 10GBASE-T
LINK/ACT Flashing green Data is being sent and received.
Green No network traffic.
• Do not unplug the cable while data is being transferred.
• Be sure to confirm that the LAN connector indicator is lit before configuring the subsequent
settings.
l
Method 2 for checking the LAN connection of the control PC
1
From MENU on the touch panel, tap [SETTING 2] > [System setting] > [Network setting].
• A dialog box appears.
To Next Page
Loading...
