3. Importing Jobs in MPC via Shared Folders
15
(1) When continuous print mode is on
• Printing starts immediately.
(2) When continuous print mode is off
• The job is added to the queue. Please turn on continuous print mode to start printing.
(3) If another job is currently being printed
• The job is added to the queue. Once the current job has finished printing, the queued
job will automatically start. Please note that when automatic operation mode or work
change mode are turned on, continuous print mode will turn off and printing will stop
once the print in progress has finished.
Copying jobs to a shared folder at any time
Jobs can be created in advance on the RIP PC, and then copied to the shared folder at any time for
importing to MPC.
1
Create a job on the RIP PC in advance.
2
Copy the job created on the RIP PC to the shared folder (SharedJob or HotFolder) to be used.
• Enter [\\*******] in the Explorer address bar to open the shared folder of this machine.
• Please change "********" to the serial number of the printer.
• From MENU on the touch panel, tap [SYSTEM] > [System information] to display the
serial number on the browser screen at right.
To Next Page
Loading...
