3. Importing Jobs in MPC via Shared Folders
14
l
When using SharedJob
1
From MENU on the touch panel, tap [PRINT] > [JOB LIST] > [SharedJob].
• If you have already opened the [SharedJob] folder, tap the refresh button.
• Saved jobs are displayed.
• To print, select a job from the job list and start printing.
l
When using HotFolder
1
When a job is output to HotFolder and data loading is complete, printing starts immediately.
• Jobs that have been successfully loaded are stored in the [HotFolder].
• Up to 100 jobs can be stored in HotFolder by default. If the number of jobs stored in the
HotFolder exceeds the set value, jobs are deleted in order with the oldest print operation
first. The number of stored jobs can be changed at [System setting] > [HotFolder setting]
under Setting 2 Menu.
2
Depending on the [QUICK MENU] > [Continuous print] setting, the following operation will
occur.
To Next Page
Loading...
