Mimaki Europe B.V.
Sign Graphics Products
Media feeding and take-up
• Handles media of up to 40kg
• The take-up roll unit of JV150 has a strong torque to support media of 40kg
• Maximum diameter of up to 250mm
• The height of the take-up roll unit is 17cm, which is high enough to roll up
the media of the diameter of up to 250mm
• Prints one roll of media with high feeding accuracy
• The diameter of the taken-up media is measured by a sensor
• This keeps the tension of the media constant
Take-up roll switch
for manual operation
press the button to roll
up the media.
31
To Next Page
Loading...
