MIMAKI JV150-130 - Highly versatile printer

Mimaki Europe B.V.
Sign Graphics Products
Highly versatile printer
• Larger ink drop
• 3 different drop sizes are automatically selected from 7drop sizes, depending
on the selected print quality (profile)
• When working with SS21, the 7 drop sizes are 4pl,7pl,8pl,14pl,16pl,24pl, and 35pl
• For high speed printing with high densities, the variable dot technology with a maximum
dot size of 35pl is used (56.2m²/h with SS21/BS3/BS4, and 58m²/h with Sb53/SB54)
• This gives the printer a wide coverage from high resolutions, to low resolution printing
with higher densities
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large
21ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Large
35ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Low density due to a gap between the dots
↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots
↓
Suitable for High speed mode
8