MIMAKI JV33-160 - Page 134

4-20
6
Remove the cleaning solution car-
tridge.
• The ink left in the head or tube is discharged to the
waste ink tank.
• The right display on the right is displayed after dis-
charging.
7
Set the cleaning solution cartridge to
the ink station.
• Absorbing of the cleaning solution is started.
• The display on the right is displayed after absorb-
ing.
8
Remove the cleaning solution car-
tridge.
• The ink left in the head or tube is discharged to the
waste ink tank.
• The right display on the right is displayed after dis-
charging.
• Check the condition of waste ink tank, and then select whether the washing is terminated
or restarted.
• When the washing is restarted, return to the step 5 by pressing the key.
9
Press the key.
10
Press the key several times to end.
*DISCHARGE*
00: 00
Se t :Wash i ngCa r t r i dge
1234 5678
*ABSOPRPTION*
00: 00
Remo ve : Ca r t r i dges
1234 5678
*DISCHARGE*
00: 00
Maint.WashLiquid
END< >D I SCHARGE