MIMAKI JV33-160 - Test Printing

2-20
Test printing
Print a test pattern to check that there are no discharging defects such as nozzle clogging (slight touching of
ink or nozzle missing).
About test patterns
This machine provides you two test patterns.
 Normal test pattern (when using ink other than white ink)
When you use ink that you can check by printing a test pattern on a white media, print this test pattern.
 Test pattern for checking white ink
When you use a white media and wish to check discharging status of white ink, print this test pattern.
Note on test printing
• When using a leaf medium, set one that is larger than an A4-size medium in the longitudinal
direction.
• When using a roll medium, rewind the medium by hand before printing so that it is not loose.
When the roll medium has not been rewound tightly, it may cause image quality to deteriorate.