MIMAKI JV33-160 - Setting Tube Washing Interval in Sleep Mode

4-26
Setting tube washing interval in Sleep mode
Set the interval at which cleaning of the caps and pump tubes is to be performed using the cleaning solution
during sleep mode.
1
Select [SLEEP SETUP] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [SLEEP SETUP] by pressing the keys.
(4) Press the key.
2
Select [PUMP TUBE WASH] by press-
ing the keys.
3
Press the key.
4
Set the tube washing interval by press-
ing the keys.
• Set value : OFF, 1 - 168 hours
5
Press the key.
6
Press the key several times to end.
• When the cleaning solution has not been filled in the
machine, the right display is displayed at the step 5. Fill the
cleaning solution ( P.4-8) then redo the operations from
the step 1.
SLEEP SETUP
PUMP TUBE WASH < e n t >
SLEEP SETUP
WA S H I N T E R V A L = 1 h
SLEEP SETUP
WA S H I N T E R V A L = 4 h
SLEEP SETUP
PUMP TUBE WASH < e n t >
** Washing Liquid **