MIMAKI SWJ-320 S2 - Page 136

© 2013 MIMAKI ENGINEERING CO.,LTD. 6.2.4 P.1
R.1.0
1
2
3
4
5
6
7
8
6.2.4 Suction pump
 Work procedures
1. Open the cover RFU, and lay waste around the pump.
2. Loosen the lock ring, and disconnect the tube.
3. Remove the screws(x2), and remove the tube pump 12 all
assy..
4. Reverse the disassembly procedure for reassembly.
Pump assy.
Tube
Tube
Loosen
Take care not to pollute the surroundings with
waste ink or washing liquid.
Screw
Tube pump 12 all assy.
Be sure that the pump tube of the discharging side
is stored with the waste ink tank.
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Suction pump
Model SWJ-320S Issued 2012.07.19 Revised F/W ver Remark
1.0
Rev.