MIMAKI TS34-1800A - Page 103

© 2011 MIMAKI ENGINEERING CO.,LTD.
4.2.14 P.1
1
2
3
4
5
6
7
8
R.1.0
4.2.14 SERIAL No.
 Function
Confirms and sets the serial number. 8 characters of alphabet and numeral (0-9, A-Z) can be input.
Because the serial number is input before shipment, field entry is impossible.
Reenter the parameter only if it has been initialized.
 Procedure
1. Select [SERIAL No.] from the operation menu.
2. Enter (Confirm) the serial number.
[]/[]: Change the numerals.
[]/[]: Moves the cursor
(When the cursor is in the left or the right end,
key input does not work.)
[ENTER]: Finalizes
[END]: Cancellation of input
<LOCAL. 1> [#01]
FUNCTION
#ADJUST <ENT>
#ADJUST
SERIALNo. <ent>
[FUNCTION]
#SERIAL No.
00000000
If the serial number has been set, it cannot be changed.
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > SERIAL No.
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.