MIMAKI TS34-1800A - Page 173

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.5 P.1
1
2
3
4
5
6
7
8
6.2.5 Cap Head Assy
 Work procedures
1. Turn off the main power supply of the machine.
2. Manually move the head unit over the platen.
3. While pushing down the cap head assy, slide it to the left and
remove it from cap base 1H.
4. Remove the tube, cap SPG and cap stopper from the cap head
assy.
5. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Cap Head Assy
Cap Head Assy
Cap base 1H
Tube
Cap SPG
Cap Stopper
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Cap Head Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.