MIMAKI TS34-1800A - Page 210

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.12 P.1
1
2
3
4
5
6
7
8
6.4.12 Keyboard PCB Assy
 Work procedures
1. Remove the KB cover.
2. Disconnect the cable from PCB, remove the screws, and then
remove the KB panel.
3. Remove the screws and then remove the keyboard PCB assy.
4. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
Keyboard PCB Assy
KB panel
KB Panel
Keyboard PCB Assy
Key Top
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Keyboard PCB Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.