MIMAKI TS34-1800A - Machine Information Confirmation

© 2011 MIMAKI ENGINEERING CO.,LTD.
4.2.4 P.3
4.2.4 [HEAD ADJUST] DROP.POS
1
2
3
4
5
6
7
8
 FINE-Y Bi
Use only the D row of the head 1 for pattern drawing.
Adjusting item: Head1-1
Adjusting value: -50.0~50.0 dot (unit: 0.1 dot)
6. Enter the adjustment value.
#DROP POS. HsLgDRFT
Y Bi H1 -H1 : 0.0
When this adjustment has been made, previously
adjusted value of [DROP.POScorrect] is cleared.
R.1.0
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > [HEAD ADJUST] DROP.POS
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.