MIMAKI TS34-1800A - Exterior Surface Cleaning; Platen Cleaning Procedures

© 2011 MIMAKI ENGINEERING CO.,LTD.
4.2.8 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > POINTER OFFSET
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.
R.1.0
4.2.8 POINTER OFFSET
 Function
Print the adjustment pattern and adjust the location of the LED pointer and print origin (Nozzle A Column).
 Procedure
1. Select [POINTER OFFSET] from the operation menu.
2. Make necessary adjustments.
[ENTER]: Starts drawing.
After drawing is completed
[], [], [], [] : LED pointer movement
Align the LED pointer to the pattern position
shown on the left (intersection of the straight
lines).
[ENTER]: Settings
[END]: Cancellation of input
<LOCAL.1> [#01]
FUNCTION
#ADJUST <ENT>
#ADJUST
POINTER OFFSET <ent>
LED Pointer