MIMAKI UCJV300 - Set up PC.

- 6 -
(3) From the [Tool] menu, select [Cutting Device Manager].
(4) Select UCJV300/150 in [Available Devices].
(5) Enter [Name], and then click [Add].
• UCJV300/150 is added to the list.
(6) Click [Close].
4. Register CuttingLink with RasterLink6Plus.
• Make sure that CuttingLink is running.
(1) Start RasterLink6Plus.
(2) Select [Option...] from the [Environments] menu in Raster-
Link6Plus.
• CuttingLink is started automatically when PC starts.