Need help?Do you have a question about the MIMAKI UJF-3042 MkII and is the answer not in the manual?
Secure sufficient space for installation before assembling this machine. Decide the place considering the size of the machine and a space required for printing.
Safety precautions and guidelines for handling ink bottles to prevent damage or spills.
Step-by-step instructions for setting ink bottles into the machine correctly.
Instructions on how to correctly power on the machine and connected PC.
Procedures and precautions for safely powering off the machine and connected PC.
How to set the printing origin position using JOG keys or menu options.
How to perform test prints to check nozzle condition and print quality.
Procedures for cleaning the print head to resolve nozzle issues.
Steps to start printing an image from computer data.
Explains settings related to head height for optimal printing based on media.
Process for printing a correction pattern to adjust media feed rate and color density.
Corrects misregistration issues in color or spot color printing.
Configures network settings like IP address, DHCP, and connection checks.
Configures settings for remote control operations via Mimaki Remote Access.
Details machine behavior when nozzle missing or errors occur during printing.
Configures automatic nozzle recovery for detected missing nozzles.
General guidelines and frequency for routine maintenance tasks to ensure longevity.
General safety precautions and advice for cleaning the machine.
How to maintain the ink cap and wiper for optimal performance and image quality.
Detailed steps for cleaning the wiper and ink cap components.
Procedures for washing the nozzles to resolve clogging issues.
Specific nozzle washing steps when using PR-200 ink.
Regular cleaning of the ink discharge passage to prevent clogging.
Precautions and methods for cleaning the ink head assembly.
How to use alternative nozzles when some are not functioning.
Procedures to address issues with ink overflow in the system.
Actions to take when the waste ink tank confirmation message is displayed.
Procedure for emptying the waste ink tank as per instructions.
Addresses warnings related to the wiper waste ink tank.
Instructions for refilling the head with antifreeze mixed liquid.
Steps to diagnose and fix issues related to the machine not powering on.
Troubleshooting steps for when the machine fails to start printing.
Corrective actions for unsatisfactory image quality, like lines or blur.
Steps to address clogged nozzles when head cleaning is ineffective.
Actions to take when an ink bottle warning message is displayed.
Immediate actions to take in case of ink leakage.
Lists common warning messages and their causes and solutions.
Lists common error codes, their causes, and solutions for machine errors.
Lists physical and operational specifications of different machine models.
To Next Page
General