3-18
Chapter 3 Setup
Setting a AUTO Power-off
When no operation has been performed for the set time,
the power supply is automatically turned “OFF”.
1
Press the
(MENU)
in LOCAL mode.
2
Press to select “Machine Setup”,
and press the key.
3
Press to select “AUTO POWER
OFF”, and press the key.
4
Press to select a set value, and
press the key.
• Set Value : OFF / 10 to 600min
5
Press the key several times to
end the setting.
Setting Time
You can set time of your country (time difference).
1
Press the
(MENU)
(>>)
key in LOCAL mode.
• MACHINE SETUP MENU will be displayed.
2
Press to select “TIME” , and
press the key.
3
Press to enter time, and
press the key.
• Hour/Minute/Second/Time selecting:
by the [][] keys.
• Hour/Minute/Second/Time inputting:
by the [][] keys.
4
Press the key several times to
end the setting.
Setting Unit (Length)
Units used by this machine are set.
1
Press the
(MENU)
(>>)
key in LOCAL mode.
• MACHINE SETUP MENU will be displayed.
2
Press to select a set value, and
press the key.
• Set value of length : mm / inch
3
Press the key several times to
end the setting.
Setting a KEY BUZZER
You can turn off the buzzer sound when pressing the key.
1
Press the
(MENU)
(>>)
key in LOCAL mode.
• MACHINE SETUP MENU will be displayed.
2
Press to select “KEY BUZZER” ,
and press the key.
3
Press to select a set value, and
press the key.
• Set value : ON/ OFF
4
Press the key several times to
end the setting.
HEAD TEMP.STANDBY TIME
5min ～ 15min
5min
Set the time until head temperature goes to
standby.
*1. Settable only when Auth. is not OFF.
*2. Settable only when Auth. is POP before SMTP.
*3. The "Remote Control" function is supported only by the UJF-3042 MkII e/UJF-3042 MkII EX e/UJF-6042 MkII e.
*4. Displayed only when the option is enabled.
Function name Set value Default Meaning
• If the machine received data from the PC in the
auto-power-off status, the power supply is turned
ON, however, printing operation is not started
automatically.
• -20 hours to +4 hours can be set.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.
To Next Page
Loading...
