Chapter 1 Before Use
1-4
Rear
Carriage
A print head for printing, LED UV device, and a light
pointer in the print head cover are mounted on the
carriage.
EMERGENCY SWITCH
One EMERGENCY switch is placed on the front face of
the unit and one is placed on the right side in the rear part
of the cover.
When stopping the machine for safety reason, press the
switch.
• Do not look directly at the LED UV light with the
naked eye, even if it is through the front cover.
This light can be extremely bright depending on
the printing conditions.
• Use the accompanying light-shielding glasses.
Main power switch
Turn ON/OFF the power
of the machine.
USB socket
Connect USB
interface cable.
LAN connector
This is Ethernet
interface
connector.
• The emergency switch on 3042MkII/
3042MkII e is optional.
• To your use this option, you will need a
mounting work by our service engineers.
Please note that the optional accessories
can not be attached by the customer.
When you press the emergency switch
and the machine stops, be sure to
follow the procedures below:
(1) Disconnect from the outlet before
resolving the fault.
(2) After checking the safety, pull the
emergency switch upward (or
rotate) to release.
(3) Connect to the outlet.
To Next Page
Loading...
