6
(2) Capping Station ("Cleaning the Wiper and Cap" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean
the head frequently using the cleaning liquid for maintenance suitable for the ink used to avoid the stains on
the head.
• F-200 / LF-200 Washing Liquid (SPC-0568)
1
Move the carriage and open the right front
cover.
• Refer to the Step 1 to 4 of Chapter 4 “Cleaning around
the wiper” of the user’s manual to perform the operation.
2
Clean the wiper.
3
Clean the cap.
• Dip the UJ Cleaning swab into the cleaning liquid for
maintenance and wipe off the cap. Wipe off so that
cleaning solution for maintenance will not remain.
4
Clean the surroundings of the wiper
• Clean the ink around the wiper using the clean stick
around the head.
To Next Page
Loading...
