To Next Page

UJF-7151 plus Clear Ink Print Guide

This Guide explains how to obtain various kinds of printing effects by using LH-100 clear ink (LH100-CL-BA) ,

LUS-120 clear ink (LUS12-CL-BA) and LUS-350 clear ink (LUS35-CL-BA) with the UJF-7151 plus printer.

Read this Guide carefully before using the ink.

Applicable environment

Table of Contents

Applicable environment ............................................................................................ 1

Setting the printer ..................................................................................................... 2

Effects and printing with clear ink ........................................................................... 4

Clear ink’s effects ................................................................................................................... 4

Ways clear ink can be printed ............................................................................................... 5

Printing methods ....................................................................................................... 6

Data creation and printing procedures ................................................................................. 6

1. Decide the way the clear ink is to be printed ................................................................... 7

A. Printing the clear ink over the whole of the color image ................................................... 8

B. Printing the clear ink onto the valid pixels of the color image .......................................... 9

C. Printing a special clear ink image .................................................................................. 10

2. Select the clear ink’s effect: set the UV mode ............................................................... 13

a. Setting Glossy Print ........................................................................................................ 14

b. Setting Matte Print .......................................................................................................... 14

c. Setting Emboss Print ...................................................................................................... 15

3. Set the recommended values for the printing conditions ............................................ 16

4. Execute printing ............................................................................................................... 17

Setting glossy finish for Emboss Print ................................................................. 18

Printer UJF-7151 plus F.W. Ver. 1.80 or later

Ink Color/Clear

It can be used in the following two combinations.

• LH-100 color ink + LH-100 clear ink

• LUS-120 color ink + LUS-120 clear ink

• LUS-350 color ink + LUS-350 clear ink

RIP RasterLink6 Ver.5.4 or later

MIMAKI UJF-7151 plus Print Guide

Other manuals for MIMAKI UJF-7151 plus