9
10. Periodically care (once a month)
(1) Refill and check the antifreeze mixed water (“Refilling antifreeze mixed water” Chap-
ter 4 of the Operation Manual)
It is recommended that check the amount of cooling water about once a month to keep the machine itself in
good working order.
When cooling water is a little, refill the cooling water.
11. The examples of defective printing
These following examples indicate improper head (nozzle) firing by dust, which effect printing.
Confirm the nozzle condition periodically before or during outputting not to use in such as this condition.
The nozzle condition can be confirmed with [test printing] in this plotter. (Operation manual Chapter 2 “Test
Printing”)
Deflection Nozzle out
Ink dropping Satellite
To Next Page
Loading...
Need help?
General