10
When the waste ink tray is full
Waste ink used for head cleaning gathers in the waste ink tray and the wiper tank.
Periodically check the wiper tray/tank and when they are full, dispose of the ink.
Disposing of the ink in the waste ink tray
1
Attach the Y bar handle, and raise the Y
bar.
• Turning the Y bar clockwise, raise the Y bar to the
top to open the space between the waste ink tray
and the ink guard plate.
2
Remove the front cover.
• Remove the 4 screws to remove the cover.
3
Remove the waste ink tray.
• Raise the waste ink tray with the cover, slide it to the
front, and then remove the tray.
• If you need a spare waste ink tray/tank, contact a distributor in your district or our office.
• Prepare a polyethylene tank to put in the waste ink.
• When ink is discharging such as for head cleaning, conduct the operation after the
discharging is completed.
• Handle the waste ink tray/tank with care not to spill the waste ink.
• Dispose of the waste ink when it has gathered about half of the waste ink tray.
Tools
• Phillips screwdriver • Gloves • Goggles
Ink guard plate
To Next Page
Loading...
