In case the print does not improve
5
8
If sponges are dirty, replace the
sponge.
• Remove the sponge with tweezers, then set the
provided new sponge.
9
After cleaning, press the key.
• Initializing starts.
10
Press the key to finish.
How to recover improper nozzle discharge
When not using this machine for a long time, or according to environmental temperature, the nozzle may
not be stably discharged. In this case, follow the procedures below to recover the nozzle.
1
Perform daily care.
• Perform daily care of the all parts described on this manual.
2
Clean the head. ( Operation Manual P.2-28)
• After step 1, perform the head cleaning according to the operation manual.
• Repeat the head cleaning and test printing, then confirm the nozzle is not clogged.
• In case the nozzle are still clogged after these operations, contact our customer service or a
distributor you purchased, to replace the head or others.
WI PER CLEAN
COMPL E TED : e n t
ENTER
END
To Next Page
Loading...
