MIMAKI UJV-160 - Installing this machine; Setting media; When the waste ink tray is full

12
Disposing of the waste ink in the wiper tank
1
Turn the power on.
• After initializing, <LOCAL> is displayed.
2
When <LOCAL> is displayed, press the
key.
3
Select the [MAINTENANCE] with the
key, and press the
key.
4
Select the [ST.MAINTENANCE] with the
key, and press the
key.
5
Select the [CHANGE WIP TANK] with
the key, and press the
key.
6
Open the cover of the waste ink box.
(Rear of this machine)
(1) Remove the screws fixing the waste ink box
cover.
(2) Open the cover.
7
Take the wiper tank out, and dispose
of the waste ink.
• Turn the tank holding the tank cover, take out
the tank, and then dispose of the ink in the
tank.
• Dispose of the waste ink pursuant to the
regulations of your district.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NT ENANCE < ENT >
ENTER
MA I NT ENANCE
ST . MA I NTENANCE < en t >
ENTER
ST . MA I NTENANCE
CHANGE WI P TANK< e n t >
ENTER
Waste ink box cover