MIMAKI UJV-160 - Turning the power ON;OFF; Troubles displaying messages; Warning label

4
Wiper cleaning
1
Turn the power on.
2
When <LOCAL> is displayed, press the
key.
3
Select the [MAINTENANCE] with the
key, and press the
key.
4
Select the [ST.MAINTENANCE] with the
key, and press the
key.
5
Select the [WIPER CLEAN] with the
key, and press the
key.
• The carriage moves to near the flushing tray on
the left.
• The wiper moves to the front.
6
Wipe out the dirt of the wiper with the
cleaning swab.
• Wipe the places shown in the right.
7
Wipe the the dirt of the wiper rubber
with the cleaning swab.
• Wipe the places shown in the right.
• If the dirt is heavy, replace the rubber.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
ENTER
MA I NT ENANCE
ST . MA I NTENANCE < en t >
ENTER
ST . MA I NTENANCE
WI PER CLEAN <en t >
ENTER