P/N: H-046-007060-00 Rev 3.0
17
BeneVision TD60 Quick Reference Guide
Adjust Display Order
The TD60 allows the clinician to adjust the parameter order on the main
display. To adjust the display order:
1. Press to enter the main menu.
2. Tap Display Setup.
3. To set portrait display orientation, tap Portrait Order.
To set landscape display orientation, tap Landscape Order.
4. Tap a parameter or waveform.
The parameter icon displays to the right.
5. Drag the selected parameter to the desired position and release.
6. Repeat steps 4 and 5 as needed.
7. Press to return to the main screen.
SCREEN LOCK/VIEW ONLY MODE
The TD60 provides the ability to lock the touch screen display to restrict user
access, options for View Only and Locked are available. View Only allows
patient data to be viewed but prevents access to settings without a passcode.
Locked requires a passcode for any access to the TD60.
Enable the Screen Lock
After the first time screen lock is enabled, a passcode is required.
To enable the screen lock:
1. Press to enter the main menu.
2. Tap Maintenance.
3. Enter maintenance password.
4. Tap Accept.
5. Tap Screen Lock to select a screen lock mode: Locked or View Only.
6. Enter the screen lock passcode.
The selected lock mode is displayed to the right of Screen Lock.
7. Press to return to the main screen.
To Next Page
Loading...
Need help?
General
