3-26 System Installation
Only when the system is configured with DICOM basic function module, and installed
DICOM Worklist, MPPS, DICOM Structured Reporting and Query/ Retrieve modules, can
the corresponding preset settings be found in DICOM Service screen.
The DICOM Service Setting is used to set properties of DICOM services as Storage,
Print, Worklist, MPPS, Storage Commitment and Query/ Retrieve.The detail setting for
DICOM refer to User Manual chapter 10.
DICOM Worklist can be configured only after DICOM Basic is configured,
and if DICOM Worklist function is not configured, the “Worklist” page is not
accessible.
To Next Page
Loading...
Need help?
General
