System Basics
1-12
To select an option from a pull-down list, turn the trackball to move the cursor onto the
pull-down list or
and then press <Set> to pop up the options. Then turn the trackball to
move the cursor onto the option you want and then press <Set>.
Edit box
You can enter characters into an edit box. There are two kinds of edit boxes.
Turn the trackball to move the cursor onto the edit box shown above and the cursor is
displayed as a “|”. Then press <Set> and the cursor appears on the leftmost part of the edit
box. After that, you can enter characters into the edit box.
To enter characters into the edit box shown above, turn the trackball to move the cursor onto
or and then press <Set> once or more until the value you want appears.
Combo box
A combo box is the combination of an edit box and a pull-down list. You can enter characters
into it, as you do to an edit box; you can also select an option from it, as you do to a pull-down
list.
Selection box
A selection box is used to select an option.
To select an option, turn the trackball to move the cursor onto the selection box and then
press <Set> or <Back> once or more until the option you want appears.
List
Edit box
Combo bo
Edit box
To Next Page
Loading...
Need help?
General
