Patient Data Management 10-13
Send Exam
The system supports sending data to external memory devices, print or iStorage. You can use this
function to export the exam data to external devices (in PC data or DICOMDIR data format) and then
import to PC or restore to the ultrasound system to review the data.
1. Select the patient record, click [Send Exam] in the menu to send exam data or images of the
selected record.
Press <Ctrl or <Shift> with <Set> key on the control panel to select more than one exam or
image at one time.
2. Select from the destination:
DICOM: select the storage/print server to store or print DICOM.
DICOM format: use DICOMDIR format as the backup; you can change the cine
compression mode, and JPEG compression mode.
USB disk or disc: send the exam to USB disk or disc.
The report format is selectable.
Format transfer is available when sending images to USB devices or disk.
Print: send the image to the video/graph printer.
MedTouch/MedSight: send the exam to MedTouch/MedSight.
New Exam
After you select a patient data or exam in the iStation screen, click the [New Exam] to enter the
Patient Info screen, where you can select the exam mode and click [OK] to begin a new exam.
Select All/Deselect All
Click [Select All] to select all the patient data listed. Then the button changes into [Deselect All], you
can cancel all the selections by clicking [Deselect All].
To Next Page
Loading...
Need help?
General
