What to do if my Mindray Medical Equipment monitor displays characters but no images?
If the monitor displays characters but no images on your Mindray Medical Equipment, first, adjust the transmission power, gain, or TGC control. Then, make sure the probe is properly connected. Finally, unfreeze the image if the system is in a frozen state.
How to fix degraded image quality on Mindray Z5 Medical Equipment?
If the image quality has degraded on your Mindray Medical Equipment, first, select the appropriate exam type. If that doesn't work, adjust the image post-processing settings or reset them to default values. As a last resort, reset the system to the factory default settings.
Why won't the power indicator light on my Mindray Z5?
If the power indicator does not light on after turning on your Mindray Medical Equipment, it could be due to an abnormal power system or incorrect connection of the power cord. Verify that the plug has not become loosened or dislodged from the back of the system.
What to do if the Mindray Z5 monitor is on but the image is blank?
If the monitor is on but the image is blank on your Mindray Medical Equipment, the interval between turnoff and restart may be too short. Turn off the system and wait at least one minute before restarting. Alternatively, the monitor brightness or contrast may be improperly set, so adjust the contrast.
General| Brand | Mindray |
|---|---|
| Model | Z5 |
| Category | Medical Equipment |
| Language | English |
To Next Page
