Mindray Z5 Operator's Manual

11-4 Setup
Type
Item
Description
Reset Config
Probe
To set the default probe model for the system.
/
MITI
To set MI TI indexes displayed for current probe/exam
mode.
Freeze
Config
Status after Freeze
To set the system status after image is frozen.
Image
Steer
To set the steer mode in B+ Color +PW imaging mode.
C&PW: select to adjust the sample volume in color
mode and sample line in PW mode together.
C/PW: select to adjust the sample volume in color
mode and sample line in PW mode individually.
Auto Invert
The spectrum can automatically invert when the color
flow is steered to a certain angle, thus accommodating
operator’s habit of distinguishing flow direction.
Cine Memory
To set the cine memory splitting type.
iScape Ruler
Display
To set if to display the iScape ruler on iScape imaging
mode.
11.1.4 Application
Open the Meas page via [Setup]-> [System Preset]-> [Application]. Through the page, you
can set the measure ruler, follicle and relevant information. For details, please refer to the
Operator’s Manual [Advanced Volume]

Mindray Z5 Specifications

General

Brand	Mindray
Model	Z5
Category	Medical Equipment
Language	English