Mindray Z5 - 5 Function and Performance Checking Method; 5.1 Instruction; 5.2 Checking System Status

Exam Preparation 4-9
2. Save the exam information, including report, imaging mode, exam mode, image
parameters, operation mode, imaging / measurement data and so on.
4.6.2 End an Exam
Before examining a new patient, press <End Exam> to end the exam of the previous patient,
update the patient ID and information, to avoid mixing data of the next new patient.
To end an exam, you can do one of the following:
 Press <End Exam> on the control panel.
 Click [New Patient] on the Patient Info screen to end the last patient exam and clear
the patient information.
 Click [New Exam] on the Patient Info screen (or iStation screen, or Review screen) to
end the last exam and clear the exam data.