Mindray Z5 - Page 135

System Diagnosis and Support 8-7
Ultrasonic
software
initialization
Platform
initialization
Initializing gui…
Peripheral
initialization
Initializing ultrasound peripheral…
The total
increment is 1
Imaging
initialization
Initializing ultrasound image…
The total
increments are 2
Application
initialization
Initializing ultrasound application…
The total
increment is 1
Finishing
initialization
Initialization completed…
The total
increment is 1
The configuration files of the course are as following:
Tips
Related operation
The corresponding
increments
No tips
Attach the path to configuration files
Initialize display, the main window, sound and the USB
representative
Turn on the bus device BackboneDev and LPC
Initialize the time and the processing function of
Multilanguage
Initialize peripheral file system, network and the driver
Enumerate peripheral ports
Configure timer, Initialize soft interruption, construct
maintenance servicer and configure static data of the
system
Configure system font
Load layout information
Initialize UI management, and Initialize UI mark standard
library
In increments of 7.
Initializing
hardware…
When loading boot-trap graphic, 7 refreshing progress
bars will display
Release factory package of configuration data
Maintain the data servicer
Loading
system
preset…
Generate the servicer of local setting and system setting
In increments of 1.
Loading
common
exam
preset…
Generate general data management of the exam mode
In increments of 1.
Loading
exam
preset...
Generate measure preset, peripheral and network, KMP
package of images and the preset servicer of the network
strafing
In increments of 4.