Minelab GP 3000 - Page 11

ASSEMBLY AND LIST OF PARTS
PRE-ASSEMBLED SECTIONS
Figure 2.2 Pre-assembled sections and parts list
A. Lower Shaft Assembly
1. 11”Double D Coil
2. Coil Cable
3. Skid Plate
4. Fibreglass Lower Shaft
5. Teardrop Washers
6. Nylon Nut & Bolt
B. Intermediate Shaft Assembly
7. Intermediate Shaft
C. Upper Shaft Assembly
8. Upper Shaft
9. Handle with Wrist Strap
10. Control Box
11. Armrest Parts (2)
12. Nylon Bolt (2)
13. Nylon Nut (2)
14. Arm Straps (2)
15. Armrest Cover
D. Headphones
16. Headphones
E. Battery and Battery Pack
17. Battery
18. Battery Pack
19. Battery Power Cable
F. Extras
20. Velcro Cable Straps (3)
21. Bungy Cord
22. Bungy Knuckle
7
ASSEMBLY
2
G
P
3
0
0
0
P0614-A
11” Double D Coil (1)
& Skid Plate (3)
Tear-drop Washers (5)
Nylon Nut & Bolt (6)
Velcro Cable
Straps (20)
Fibreglass
Lower Shaft (4)
Battery Power
Cable (19)
Intermediate
Shaft (7)
Coil Cable (2)
Upper Shaft (8)
Handle with
Wrist Strap (9)
Armrest Parts (11)
Nylon Nuts (13)
Battery (17) &
Battery Pack (18)
Headphones (16)
Bungy Cord (21) Bungy Knuckle (22)
ArmStrap(14)
Armrest Cover (15)
Control Box (10)
Nylon Bolts (12)