Minelab GP 3000 - Introducing the Minelab GP 3000

The Minelab GP 3000 utilises “Dual Voltage Technology” (DVT),
which is based upon the Bi-polar technology used in our military
range.
Here are some features of the GP 3000:
• NEW Low-Noise circuitry
• NEW battery harness
• NEW “Smart Point” diagnostic port
• DVT technology for optimum depth and sensitivity in all soil
types
• Long-life 12Ahr Gel Cell battery
• Selectable TX (transmit) modes (Soil Switch) for optimum
performance in different soil conditions
• Selectable RX (receive) modes (Coil Switch) for greater
sensitivity and less susceptibility to interference
• Heavy Duty Bungy Strap
Like its predecessor, the GP extreme, the GP 3000 can handle heavily
mineralized and salty ground conditions with greater ease than
previous detectors, which effectively opens up NEW detecting areas.
The new Low-Noise circuitry found in the GP 3000 results in a
smoother threshold, enhancing your ability to hear faint signals caused
by small and deep targets. This allows you to revisit old “worked-out”
areas, and find the gold others have missed.
Minelab wished to thank you for purchasing our most advanced gold
detector ever, and are confident the GP 3000 will lead you to success in
your quest for gold and treasure.
INTRODUCING THE MINELAB GP 3000
INTRODUCING THE MINELAB GP 3000
3
INTRODUC-
TION
1
P0610-A
G
P
3
0
0
0