Front Panel
Figure 4.16
Figure 4.16 Rear Panel
CONTROL FUNCTIONS
Tune
Figure 4.17
Reduces the effects of electromagnetic interference from sources such
as power lines, radio transmitters and other metal detectors.
Automatic tuning is started by pressing and releasing the Tune switch.
The tuning process takes approx. 60 sec. and completion is indicated
by three sharp ‘beeps’.
Figure 4.17 Tune control
23
4
CONTROLS
P0524-A
Tune
BalanceCoilSoilIron Discriminate Coil Connector
Cancel
Double D
M
Salt
Sensitive
N
Disc
All Metal
Level Adjust Tracking
Fixed
MINELAB
Tune
GP 3000
N
N
N
N
P0613-B
To Next Page
Loading...
