16
HOLDING THE DETECTOR
Shaft is the
correct length
Shaft is
too short
The correct position of armrest and length of
shaft should allow you to swing the coil in
front of your body without any uncomfortable
stretching or stooping.
To adjust the length of the shafts, undo the
twistlocks, compress the spring pins of the
shafts and move them up or down to suit.
Once all shafts are clipped into position, rotate
twistlocks clockwise onto the shafts until a firm
clamping action is achieved.
(Shaft Assembly, p. 9)
To adjust the position of the armrest remove
the armrest screw and move the armrest and
stand to the desired position.
(Armrest Assembly, p.10)
Think of the detector as an extension of
your arm. It should be straight with your
forearm and feel light and comfortable
when you pick it up.
To Next Page
Loading...
Need help?
General
