Target ID
Target signals contain both ferrous and
conductivity information. This is digitally
processed and results in a number being
displayed that distinguishes between different
types of metal.
Target ID numbers range from –4 to 44 on the
X-TERRA 305 and –9 to 48 on the X-TERRA 505.
Negative numbers represent ferrous targets
and positive numbers represent nonferrous
targets.
Numeric ID
These numbers have another function. They
are also used when adjusting the menu
settings (Sensitivity, Noise Cancel, Threshold,
Volume, Tones and Ground Balance) showing
the numerical value selected.
To Next Page
Loading...
