63
FACTORY PRESETS
Press and hold Press
once
The settings Sensitivity, Ground
Balance, Noise Cancel, Threshold,
Volume and Tones are saved when
the X-TERRA is switched off. To
return to the preset menu values:
Turn the detector off.
While pressing and holding
Menu
, turn the detector back
on, by pressing Power
once.
During the start up sequence,
release Menu
.
After the start up sequence, the
factory preset message (FP), will
appear for 3 seconds to indicate
that Sensitivity, Ground Balance,
Noise Cancel, Threshold, Volume
and Tones have returned to the
preset values.
To Next Page
Loading...
