61
EDITING DISCRIMINATION PATTERNS METHOD 2
Method 2 – to reject a specic target
ID using + or –
In detection, use + and – to scroll through and
select the ID you want to modify. The flashing
segment and the target ID numbers will
indicate the selected ID.
Press Accept/Reject
to either accept
or reject that ID. The discriminated segment
and the
icon will appear (become shaded)
if rejected. The segment and the
icon will
disappear if accepted.
Accept/Reject toggles between
accepting and rejecting targets.
The all metal pattern cannot be edited.
To Next Page
Loading...
Need help?
General
