18
CONTENTS
Depth Gauge
The Depth Gauge indicates the approximate depth of a
detected target.
The Depth Gauge is a guide only. Fewer arrows indicate a
shallower target, more arrows indicate a deeper target. The
accuracy can vary depending on the target type and ground
conditions.
After a target is detected, the Depth Gauge will remain on
the LCD for 5 seconds, or until the next target is detected.
When there is no detection, the Depth Gauge icon and
arrows are turned Off.
Here is an example of the Depth Gauge reading and the
approximate target depth for a US quarter.
50 mm
2"
100 mm
4"
150 mm
6"
200 mm
8"
> 200 mm
>8"
The Depth Gauge accuracy is reduced in highly
mineralised soil.
To Next Page
Loading...
