19
CONTENTS
BACKLIGHT
The X-TERRA PRO LCD and keypad have a backlight for
detecting in low-light situations.
There are 3 backlight level settings — Off, High, and Low.
The Backlight will be Off by default each time the detector is
powered On.
Continual use of the backlight, especially at full
brightness will result in decreased battery runtime.
Adjusting the Backlight
Press the Backlight button to cycle through the Backlight
settings (from highest to lowest). The Backlight Indicator
appears on the LCD when the Backlight is On.
The Backlight button The Backlight indicator
FLASHLIGHT
X-TERRA PRO has a flashlight for detecting in low-light
situations.
The Flashlight will be Off by default each time the detector
is powered On.
Continual use of the Flashlight will result in
decreased battery runtime.
Turning the Flashlight On/Off
Long-press (2 seconds) the Backlight button.
The Flashlight indicator appears on the LCD when the
Flashlight is On.
The Backlight button The Flashlight indicator
Lighting
To Next Page
Loading...
