Minelab X-TERRA PRO User Manual

20
CONTENTS
X-TERRA PRO has a Vibration feature that provides tactile
feedback though the detector handle.
Vibration intensity varies in proportion to the target signal
strength (for both regular detecting and in Pinpoint Mode).
The Vibration setting is remembered after the detector
is powered Off. If Vibration is On when the detector is
powered Off there will be a brief vibration pulse at start-up.
Master Vibration is Off by default.
TURNING MASTER VIBRATION ON / OFF
1. Navigate to the Volume Adjust setting.
2. Press the Frequency button to toggle
Master Vibration On/Off.
TURNING FERROUS VIBRATION ON / OFF
When Master Vibration is On, Ferrous Vibration becomes
available and can be toggled On/Off.
Ferrous Vibration is turned Off by default when Master
Vibration is first enabled.
1. Navigate to the Volume Adjust setting.
2. Long-press (2 seconds) the Settings button to enter
the Tone Volume Advanced Setting.
(2 Seconds)
3. Press the Frequency button to toggle
Ferrous Vibration On/Off.
Vibration

Minelab X-TERRA PRO Specifications

General

Brand	Minelab
Model	X-TERRA PRO
Category	Metal Detector
Language	English