26
CONTENTS
Volume Adjust changes the loudness of all
detector audio, including detection signals, the
threshold tone, and confirmation tones.
Volume Adjust changes are global.
The Volume Adjust setting has a range from 0 to 25 with a
default setting of 20.
When the volume level is set to 0, all audio is muted (Off).
ADJUST THE VOLUME
1. Press the Settings button to navigate to the Volume
Adjust setting.
2. Use the Minus (–) or Plus (+) buttons to decrease or
increase the volume to a comfortable level, making sure
that loud signals (close or large targets) do not hurt your
ears.
Volume Adjust
To Next Page
Loading...
