9
CONTENTS
Introduction to Search Modes
CHOOSING THE RIGHT SEARCH MODE
The X-TERRA PRO has preset Search Modes that have unique target separation and depth abilities. Choosing the right
Search Mode is important to get the best performance for the environment you are detecting in.
Each Mode represents a common detecting use: Park, Field and Beach. Each Search Mode has two Profiles, uniquely
pre-configured to optimise the detector for the best performance in the conditions typical to that location. Each of the
Profiles can be modified and saved.
Select a Search Mode and Profile
Press the Search Mode button to select the next Search Mode.
Choose the Search Mode that best matches your detecting location — Park, Field or Beach.
To further optimise the preset detector settings, choose the best Search Profile for your detecting conditions:
Search Profile 1 is suitable for general conditions.
Search Profile 2 is optimised for more difficult conditions. Target sensitivity is enhanced, but extra noise may also result.
1. Press the Search Mode button to navigate to the Profile
you want to reset.
2. Press-and-hold the Search Mode button until 'SP'
appears on the Target ID Display.
'SP' will appear on the Target ID Display
when a Search Mode Profile is reset.
Park
Great for high-trash recreational areas,
including most general detecting.
More on page 11.
Field
Ideal for detecting in historical fields
for the widest range of target sizes.
More on page 12.
Beach
For all salty conditions; dry sand, wet
sand, surf and underwater.
More on page 13.
Profile 1
General and
Coins
Profile 2
Fine Jewellery
Profile 1
Coins and
Artefacts
Profile 2
Fine Coins and
Artefacts
Profile 1
Dry and Wet
Sand
Profile 2
Underwater
and Surf
RESET A PROFILE
Individual Search Profiles can easily be returned to their
factory preset settings:
only the local settings will be reset
any global settings will remain in their last-used state
To Next Page
Loading...
Need help?
General
