8
CONTENTS
Display
1. Discrimination Scale
The Discrimination Scale is made up of 30 individual
segments that correspond to the 119 Target IDs. Each
Segment represents 4 Target IDs (page 34).
Shows a visualisation of target signal strength when in
Pinpoint Mode (page 35).
Also displays Tone Regions for advanced audio settings.
2. Sensitivity Level
Displays the Sensitivity level (page 17).
3. Target ID Display
A numerical value (from –19 to 99) is assigned to each
detected target based on its conductive or ferrous
properties. This allows objects to be identified before
digging. For example, a US quarter will typically have a
Target ID Number of 89 (page 34).
Negative numbers are ferrous, positive numbers are
non-ferrous from fine gold (low ID’s) to large silver
(high ID’s).
4. Frequency Display
Shows the current operating Frequency (page 16).
Also shows error codes (page 43), and indicates the
current active Advanced setting.
5. Search Modes
Displays the Search Mode: Park, Field and
Beach.
Each Search Mode has 2 customisable
Profiles (page 9).
Profile
Search Mode
6. Settings Menu
A menu of all Settings and Advanced
Settings (page 21).
Advanced Setting
Setting
7. Pinpoint Indicator
Indicates that Pinpoint is turned On (page 35).
8. Depth Gauge
Shows the approximate depth of a detected target
(page 18).
9. Wireless Audio Indicator
Indicates that Wireless Audio is On (page 38).
10. Headphones Indicator
Indicates that headphones are connected to the detector
(either wireless or wired) (page 39).
11. Vibration Indicator
Indicates that handle Vibration is On (page 20).
12. Flashlight Indicator
Indicates that the Flashlight is On (page 19).
13. Backlight Indicator
Indicates that the backlight is On (page 19).
14. Tracking Ground Balance Indicator
Indicates that Tracking Ground Balance is turned On
(page 25).
15. Battery Level/Charging
Indicates the current battery level (page 40).
1112131415
1
2
3
4
5
6
10
9
8
7
To Next Page
Loading...
