7
CONTENTS
Controls
1. Charge Status LED
Shows the charge status of the detector battery
(page 40).
2. Power
Turns the detector On/Off.
Long-press (7 seconds) from Off to restore
factory settings (page 52).
3. Backlight
Selects the Backlight brightness (page 19).
Long-press (2 seconds) to turn the
Flashlight On/Off (page 19).
4. Search Mode
Selects the next available Search Mode (page 9).
Long-press (5 seconds) to reset the current Search
Mode Profile's local settings to their factory presets
(page 9).
5. All Metal
Toggles between the current discrimination pattern and
All Metal to accept all targets (page 30).
6. Pinpoint/Detect
Press from the Settings Menu to return to the Detect Screen.
Press from the Detect Screen to toggle Pinpoint On/Off
(page 35).
7. Frequency
Scroll through the available frequencies:
5, 10 and 15 kHz (Park and Field Modes) and
8 kHz (Beach Mode) (page 16).
8. Accept/Reject (page 30)
Accepts or Rejects targets by turning On/Off individual
Discrimination Segments.
Use to create discrimination patterns and to adjust Tone
Regions via the Settings Menu.
9. Minus/Plus
Press when in the Detect Screen to adjust the
Sensitivity level (page 17).
Press when in the Settings Menu to adjust the value of the
selected setting.
10. Settings
Press to access and scroll through the Settings Menu.
Long-press (2 seconds) from the Settings Menu to access
Advanced Settings where available.
11. Wireless Audio
Turns Wireless Audio On/Off (page 38).
Long-press (2 seconds) to initiate Wireless pairing mode to
connect new headphones (page 38).
1
2
3
10
9
8
7
11
4
5
6
To Next Page
Loading...
Need help?
General
